BLACKMAGIC DESIGN ATEM STUDIO CONVERTER 2

SWRCONVRCK2

Battery powered optical fiber converter with talkback, tally and mic inputs.

ATEM Studio Converter is the ideal partner for the ATEM Camera Converter. Connect up to four Camera Converters via optical fiber up to 28 miles away with bi-directional video plus tally and talkback! Connect your ATEM switcher program output to the ATEM Studio Converter and this is distributed to the four Camera Converters. Multiple Studio converters can be cascaded together when more than 4 cameras are needed. Studio converter can also be used as four independent SDI or Fiber to HDMI converters and four independent simultaneous SDI to Optical and Optical to SDI converters!

Plus de détails

2 313,52 € TTC
(1 912,00 € HT)

Disponible dans 3 – 5 jours.

Ajouter à ma liste

En savoir plus

SDI Video Input4 x 10 bit SD/HD switchable camera inputs
 1 x 10 bit SD/HD switchable program input from switcher, including tally information
SDI Video Output4 x 10 bit SD/HD switchable camera outputs
 1 x 10 bit SD/HD switchable program loop thru output connects to another ATEM Studio Switcher
HDMI Video Output4 x HDMI SD/HD switchable camera outputs
Optical Fiber Video Input4 x single mode SD/HD switchable camera inputs with LC connector
Optical Fiber Video Output4 x single mode SD/HD switchable camera outputs with LC connector
Optical Fiber Audio Input4 x single mode camera audio inputs with LC connector
 Channels 1 & 2 are camera audio
 Channels 15 & 16 are intercom audio
Optical Fiber Audio Output4 x single mode camera audio outputs with LC connector
 Channels 1 & 2 are camera audio
 Channels 15 & 16 are intercom audio
Analog Audio1 x 3.5mm stereo connector for talkback microphone
 1 x 3.5mm stereo connector for stereo headphones, compatible with iPhone headsets
AES/EBU Audio Input1 x combined headphone input
 1 x combined microphone input
 Combined inputs connect from another ATEM Studio Switcher which connects to more cameras
AES/EBU Audio Output4 x camera audio outputs
 1 x combined headphone output
 1 x combined microphone output
 Combined outputs connect to another ATEM Studio Switcher which connects to more cameras
Computer Interface1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control
SDI ComplianceSMPTE 259M, SMPTE 292M
Video Sampling04:02:02
Audio SamplingTelevision standard sample rate of 48KHz, 24 bit A/D conversion
Color Precision10 bit
Color SpaceREC 601, REC 709
Multiple Rate SupportSDI and HDMI switches between SD and HD
Firmware UpgradeFirmware built into software driver and loaded at system startup or via updater software
Installation1RU / less than 3 inches (less than 7.6 cm) deep
System CompatibilityMicrosoft Windows 7 and Apple Mac OS X
Power Supply12V