FS1
FS1 is a powerful and flexible frame synchronizer and high quality converter that helps you work with mismatched signal types to establish a consistent format for post production or broadcast.
• (HD) 1080i 25, 29.97, 30
• (HD) 1080PsF 23.98, 24
• (HD) 720p 50, 59.94, 60
• (SD) 625i 25
• (SD) 525i 29.97
Input | Possible Output Formats | ||
525i59.94 | 525i59.94 | 720p59.94 | 1080i59.94 |
720p59.94 | 525i59.94 | 720p59.94 | 1080i59.94 |
1080i59.94 | 525i59.94 | 720p59.94 | 1080i59.94 |
| |||
1080pSF23.98 | 1080pSF23.98 | 1080i59.94 | 525i59.94 |
| |||
625i50 | 625i50 | 1080i50 | 720p50 |
720p50 | 625i50 | 1080i50 | 720p50 |
1080i50 | 625i50 | 1080i50 | 720p50 |
| |||
1080pSF24 | 1080pSF24 | 1080i60 |
|
1080i60 | 1080i60 | 720p60 |
|
720p60 | 720p60 | 1080i60 |
|
Notes:
• In the case of 1080pSF 23.98 input - and when 1080i 59.94 (or 525) is selected as an output format, the FS1 automatically does 3:2 pulldown to get the correct frame rate.
• When passing 24 or 60 frame rate video, output is high definition.
• Dual SD/HD SDI, SMPTE-259/292/296, 8 or 10-bits
• Single Link 4:2:2 (1 x BNC each)
• HD component YPbPr, SMPTE-274 (3 x BNC)
• 12-bit A/D, 2 x oversampling
• SD Component (3 x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit A/D, 4 x oversampling
• +/- .25 dB to 5.5 mHz Y frequency response
• +/- .25 dB to 2.5 mHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite/YC (S-Video)
• 12-bit A/D, 4 x oversampling
• Dual SD/HD SDI, SMPTE-259/292/296, 8 or 10-bits
• Single Link 4:2:2 (1 x BNC each)
• HD component YPbPr/RGB, SMPTE-274 (3 x BNC)
• 12-bit D/A, 2 x oversampling
• SD Component (3 x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit D/A, 4 x oversampling
• +/- .25 dB to 5.5 mHz Y frequency response
• +/- .25 dB to 2.5 mHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite/YC (S-Video)
• 12-bit D/A, 4 x oversampling
• 16-Channel, 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (4 x BNC)
• 8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8 x XLR via 25-pin breakout cable)
• +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
• +/- 0.2db 20 to 20 kHz frequency response
• 16-Channel, 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (4 x BNC)
• 8-Channel, 24-bit D/A analog audio, 48 kHz sample rate, balanced (8 x XLR via 25-pin breakout cable)
• +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
• +/- 0.2db 20 to 20 kHz frequency response
• Hardware 10-bit
• Anamorphic: fullscreen
• Pillarbox 4:3: results in a 4:3 image in center of screen with black sidebars
• Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
• Zoom Letterbox: results in image zoomed to fill full screen
• Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
• Hardware 10-bit
• Anamorphic: fullscreen
• Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
• Crop: image is cropped to fit new screen size
• Hardware 10-bit
• 1080i to 720P
• 720p to 1080i
• 720p to 1080PsF
• Letterbox: This transforms SD anamorphic material to a letterboxed image
• H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an anamorphic image
• SDI RP188 via SDI BNC
• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping, nonterminating
• 10/100 Ethernet (RJ-45)
• Embedded web server for remote control
• VTECS™ protocol for Remote Control Panel
• Alphanumeric display, with dedicated buttons
• GPI in/out, 9-pin D-connector
• Pinout is as follows:
1 | GPI IN 1 |
2 | GPI IN 2- |
3 | GPI OUT 1 |
4 | GPI OUT 2 |
5 | Chassis Ground |
6 | I/O GROUND 1 |
7 | I/O GROUND 2 |
8 | I/O GROUND 1- |
9 | I/O GROUND 1 |
• RS-422, Sony 9-pin protocol (reserved for future use)
• 9-pin D-connector pinout is as follows:
1 | GND |
2 | RX- |
3 | TX+ |
4 | GND |
5 | No Connection |
6 | GND |
7 | RX+ |
8 | TX- |
9 | GND |
Shell | GND |
17.25" x 12.5" x 1.75" iRU (438.1mm x 317.5mm x 44.4mm)
• 6.5 lb (2.94 kg)
• 100-240 VAC 50/60 Hz (Dual, redundant power supplies), 25W typical; 30W max.
• Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
• Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
• Operating Relative Humidity: 10-90% noncondensing
• Operating Altitude: <3,000 meters (<10,000 feet)