BEACHTEK DXA-SLR ULTRA
DXASLRULTRA
The BeachTek DXA-SLR ULTRA is our newest and best adapter ever. Superb operation and ease of use make capturing professional audio directly to your DSLR camera a snap. New, powerful preamplifiers give you exceptionally clean audio with plenty of punch. Your audio will always be recorded in sync with the video. Direct audio recording eliminates the need to have a separate audio recording device and syncing the audio in post.
Meer info
The DXA-SLR ULTRA is very easy to set up and use. The Neutrik brand combo XLR / ¼” inputs makes it easy to attach a variety of audio gear including wireless systems, mixers, sound boards and professional condenser microphones that require phantom power to operate.
The inputs are transformer balanced for isolation and enhanced circuit protection. Built-in VU meters makes it easy to verify the proper input levels at a glance, while the level controls allow you to adjust the output signal for optimum recording. Built-in fast acting limiters prevent distortion from overly hot inputs for worry free operation. The phone jack lets you monitor the audio from the adapter during recording, or camera during playback.
A unique feature of the DXA-SLR ULTRA is the sleek detachable rod support system to easily attach a matte box, follow focus and other gear for incredible versatility. Includes two 3″ rods that are threaded on both ends. Extra rods can be simply threaded on to extend to any length needed.
The adapter mounts neatly to the bottom of the camera and can also be mounted to any standard tripod.
Everything about the adapter was designed to be extremely easy to use, from the ergonomic all metal chassis with nice rubber grips, to the bright easy to read VU meter and drift free volume controls. Nothing could be easier to use or provide better performance.
Ultra performance, ultra functionality.
Maximum Input Levels
MIC level (LO gain) +10dBu
MIC level (HI gain) -20dBu
LINE level: +14dBu
Output Level
-26dBu at 0dB on the VU meter
Frequency Response
20Hz to 20kHz (+/- 0.5dB)
THD
Less than 0.01% @ 1kHz, -30dBu input
S/N Ratio
85dB @ 1Khz, -30dBu input
Gain
LO 0dB
HI +30dB
Phantom Power
Dual regulated 12 or 48 volt power supplies
Current to 14mA (direct short)
VU meter
-18 to +3dB in 3dB increments
Battery Type
One 9 volt alkaline or lithium battery
Battery Duration
3 hours typical with alkaline battery (no phantom)
8 hours typical with lithium battery (no phantom)
Dimensions
6” x 3.75” x 1.75” (L x W x H)
(152 mm x 95 mm x 44 mm)
Weight
Adapter 18 oz (0.51 kg)
Rod Mount 8 oz (0.23 kg)