Akurat W-DMX Draadloze DMX-transmissie

W-DMX-apparate van Akurat Lighting maken betrouwbare, draadloze DMX-signaaloverdracht naar verlichtingsarmaturen via radio mogelijk.

Het Akurat W-DMX zendgedeelte werkt met elke DMX-verlichtingscontroller, die voldoet aan de DMX512-A standaard. De Akurat W-DMX ontvangstmodules zijn ontworpen om te werken met Akurat MK2 LED-armaturen, maar het systeem maakt het mogelijk om het signaal aan te sluiten op elke DMX-compatibele armatuur.

Het Akurat W-DMX systeem maakt gebruik van de W-DMX technologie van het Zweedse bedrijf Wireless Solution. Daarom is het compatibel met alle W-DMX G5 en latere apparaten vervaardigd door Wireless Solution - een van de onbetwiste leiders op de markt van draadloze DMX-signaaloverdracht.

De basiscomponenten van het Akurat W-DMX systeem zijn:

  • W-DMX Transceiver W-DMX signaalzender die is aangesloten op de DMX controller uitgang (het kan ook werken als een signaalontvanger)
  • W-DMX ontvanger W-DMX signaalontvanger die is ontworpen om te worden aangesloten op de speciale USB-ingang van de Akurat MK2 en SECTOR armaturen

Meer info

189,00 € incl. BTW
(156,20 € excl. BTW)

Leverbaar binnen 2 - 3 weken.

Meer info

Radio

The W-DMX system uses an ISM 2.4GHz radio link (optionally 2.4 + 5.2 + 5.8GHz) with AFHSS modulation (Adaptive Frequency Hopping Spread Spectrum). The principle of this modulation is to jump from subchannel to subchannel at a rapid pace, using a custom encryption sequence. The system intelligently seeks busy channels and purposely avoids them, to further reduce interference. Frequency hopping techniques were first used by the U.S. military, since they are difficult to intentionally jam and, unless you know the frequency hopping sequence, practically impossible to listen in on. The radio transmitter of the W-DMX Transceiver meets the requirements of the European Directive RED 2014/53/EU and FCC (complies with Part 15 of the FCC Rules).

 

 

 

Akurat W-DMX Transceiver

The basic function of the transceiver is to convert the DMX signal from the lighting controller output into a radio signal compatible with the W-DMX standard and send it on-air. The device can transmit all 512 channels of one DMX universe. The signal can only be received by receivers that have been previously paired with the transceiver. The linking process of new receivers is initiated by pressing the “LINK” button. Each receiver can only be paired with one transceiver.

The device is equipped with LEDs that indicate the current status. The XLR sockets allow the transceiver to be connected to the DMX line. Versions with 5-pin and 3-pin sockets are available. The transceiver is equipped with a durable aluminum housing with dimensions of 75x60x40mm.

 

The transceiver requires an external power supply with a voltage in the range of 5-24V and current up to 200mA. You can use the USB socket for this purpose, which DMX consoles is often equipped with. Our offer includes appropriate cables as well as a dedicated AC adapter .

A unique feature of the transceiver is the ability to change the transmission direction and use it as a W-DMX receiver. In this case, after pairing with an active W-DMX transmitter, the device provides a standard DMX signal via XLR sockets and can be connected to any luminaire or many DMX512-A compatible luminaires.

 

 

Akurat W-DMX Receiver

The W-DMX Receiver has been designed for use with Akurat Lighting MK2 luminaires. The receiver is connected to the USB socket located in the “DMX Terminal” zone of each luminaire. After connecting and fastening the receiver with Velcro to the fixture, the set is ready for wireless operation, as long as it is within the range of the W-DMX transmitter. The receiver can only receive signals from the transmitter with which it was previously paired.

 

 

 

 

Before sending the linking command from the transmitter, press the UNLINK button on the receiver for approx. 2 seconds. After this operation, the previous linking data is cleared from the memory and the receiver is ready for pairing with the new W-DMX transmitter. The device is equipped with LEDs indicating the current status – power supply, DMX signal presence, and the radio signal quality.

The W-DMX Receiver is equipped with a durable aluminum housing with dimensions of 60x47x25mm.