Liste des produits de la marque AKURAT LIGHTING
D4 MK2 – efficient LED panel for reporters and for the studio.
Perfectly diffused light gives beautiful, soft shadows, devoid of a matrix structure.
D4 MK2 is another incarnation of the smallest panel of Akurat D-SOFT series, a panel made of aluminum with dimensions of 30×26 cm. The fixture is now more powerful and has a much greater light output . The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.
Many accessories are available including barndoors, grid, softbox, battery plates, communication modules.
Basic parameters:
- Maximum luminous flux approx. 6000 lumens
- Maximum illuminance up to 1800 lux @ 1m
- CRI Ra=97+ TLCI 99-100
- Maximum electric power – 65W
- Version studio
Bag for secure transportation of Akurat LED panel D4.
The bag is included in the reporter kits, but can be ordered separately.
Four flaps barndoors for the S4 illuminator.
After installation of permanent brackets to the light it is possible quick assembly and disassembly of barndoors by pulling the movable upper mounting pins.
Sold as a kit for self-assembly on the light.
S4 MK2 – efficient lenticular LED panel with replaceable optics for reporters
The aluminum illuminator with dimensions of 30×26 cm is a new incarnation of the smallest panel of the Akurat S series. The panel is more than twice as powerful as its predecessor S4bi and has an essentially greater beam of light. The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.
The optical system consists of 4 interchangeable TIR lens units, placed on magnetic holders, which shape the two basic photometric parameters of the luminaire – the angle of the light beam and the maximum illuminance achieved.
Basic parameters:
- Maximum luminous flux approx. 6000 lumenów
- Maximum illuminance up to 12’800 lux @ 1m
- Light beam angle 30, 60, 90 or 120 degrees
- CRI Ra=97+, TLCI 99-100
SNAPGRID and Carry Bag for use with DOPCHOICE SNAPBAG.
For Akurat D4 or S4
SNAPGRID and Carry Bag for use with DOPCHOICE SNAPBAG.
For Akurat D8 or S8
High quality softbox dedicated for Akurat D8mk2 and S8mk2 panels, manufactured by DoPchoice, leading manufacturer of lighting modifiers from Munich.
Snapbag has a friendly for user design, making possible very quick setting on panel and easy transportation in small flat bag, without necessity of dismantle the softbox.
Snapbags are delivered with transportation bag and medium density front diffuser “HALF”.
Other density diffusers are available: 1/4 (thinner), 1/1 (denser) and the “MAGIC” diffuser.
Snapgrids 40 to mounting in front of diffuser of Snapbags are also available as additional accessories. Grid limits the light distribution to the sides without any changes in straight direction.
The Snapbags fits also to older models D8A and S8 panels.
Set of replacement lenses for the Akurat S4 mk2 LED illuminator.
You can choose from:
- Beam angle of 30 degrees.
- Beam angle of 60 degrees.
- Beam angle of 90 degrees.
- Kit of 30 degrees and 90 degrees (S4MK2 only)
The kit includes 4 units of lenses fitted to magnetic holders in luminaire. The set is packed in a plastic carrying case enables safe transport.
Sets of replacement lenses 60 and 90 degrees and double set 30+90 degrees to change a photometric parameters of S4 mk2 illuminator in a full range also available.
S2 – efficient lenticular LED panel with replaceable optics for reporters
The aluminum illuminator with dimensions of 30×26 cm is a new incarnation of the smallest panel of the Akurat S series. The panel is more than twice as powerful as its predecessor S4bi and has an essentially greater beam of light. The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.
The optical system consists of 4 interchangeable TIR lens units, placed on magnetic holders, which shape the two basic photometric parameters of the luminaire – the angle of the light beam and the maximum illuminance achieved.
Basic parameters:
- Maximum luminous flux approx. 3000 lumen
- Maximum illuminance up to 6400 lux @ 1m
- Light beam angle 30, 60, 90 or 120 degrees
- CRI Ra=97+, TLCI 99-100
S2 – efficient lenticular LED panel with replaceable optics for reporters
The bag allows secure transportation of Akurat D8 or S8 MK2 LED panels, as well as previous models.
High-quality Mean Well power supply with a very high declared Mean Time Between Failure (MTBF) of 350,000 hours.
The power supply is equipped with a connector suitable for Akurat MK2 D8 and S8 panels.
To connect to the AC network, you need a cable with an IEC C13 plug (not included with the power supply).
Honeycomb Grid 40° for D8 MK2 Illuminator
The grid is used to limit the light distribution angle to about 40 degrees, without losing the illumination intensity and the diffusive nature of the light in the direction opposite to the lamp.
An aluminum honeycomb structure covered with black composite has been enclosed in an aluminum frame.
Four flaps barndoors for D8 MK2 illuminator.
The barndoors slides under the accessory mounting brackets on the front of the panel.
Strong Velcro strips protect the barndoors against slipping out.
D8 MK2 – strong LED panel for reporters and for the studio
Perfectly diffused light gives beautiful, soft shadows, devoid of a matrix structure.
D8 MK2 is another incarnation of the flagship model of Akurat D-SOFT series, a panel made of aluminum with dimensions of 60×35 cm. The fixture is now more powerful and has a much greater light output . The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.
Many accessories are available including barndoors, grid, softbox, battery plates, communication modules.
Basic parameters:
- Maximum luminous flux approx. 12000 lumenów
- Maximum illuminance up to do 3600 luksów@1m
- CRI Ra=97+, TLCI 99-100
- Maximum electric power – 130w
High quality softbox dedicated for Akurat D4mk2 and S4mk2 panels, manufactured by DoPchoice, leading manufacturer of lighting modifiers from Munich.
Snapbag has a friendly for user design, making possible very quick setting on panel and easy transportation in small flat bag, without necessity of dismantle the softbox.
Snapbags are delivered with transportation bag and medium density front diffuser “HALF”.
Other density diffusers are available: 1/4 (thinner), 1/1 (denser) and the “MAGIC” diffuser.
Snapgrids 40 to mounting in front of diffuser of Snapbags are also available as additional accessories. Grid limits the light distribution to the sides without any changes in straight direction.
The Snapbag fits also to older models D4A and S4 panels.
Honeycomb Grid 40° for D4 MK2 Illuminator
The grid is used to limit the light distribution angle to about 40 degrees, without losing the illumination intensity and the diffusive nature of the light in the direction opposite to the lamp.
An aluminum honeycomb structure covered with black composite has been enclosed in an aluminum frame.
Four flaps barndoors for D4 MK2 illuminator.
The barndoors slides under the accessory mounting brackets on the front of the panel.
Strong Velcro strips protect the barndoors against slipping out.
Akurat Lighting W-DMX devices enable reliable, wireless DMX signal transmission to lighting fixtures via radio.
The Akurat W-DMX transmitting part works with any DMX lighting controller, compliant with the DMX512-A standard. Akurat W-DMX receiving modules have been designed to work with Akurat MK2 LED luminaires, but the system allows you to connect the signal to any DMX-compatible luminaire.
The Akurat W-DMX system uses the W-DMX technology of the Swedish company Wireless Solution. Therefore, it is compatible with all of W-DMX G5 and later devices manufactured by Wireless Solution – one of the undisputed leader on the wireless DMX signal transmission market.
The basic components of the Akurat W-DMX system are:
- W-DMX Transceiver W-DMX signal transmitter which is connected to the DMX controller output (it can also work as a signal receiver)
- W-DMX Receiver W-DMX signal receiver designed to be connected to dedicated USB input at the Akurat MK2 and SECTOR luminaires
High-quality Mean Well power supply with a very high declared Mean Time Between Failure (MTBF) of 350,000 hours.
The power supply is equipped with a connector suitable for Akurat MK2 DL, S4 and D4 panels.
To connect to the AC network, you need a cable with an IEC C13 plug (not included with the power supply).
The bag allows secure transportation of Akurat DL, S4 and D4 MK2 LED panels, as well as previous models.
Battery plates for powering MK2 panels from a battery .
A wide range of battery plates is available, allowing the fixture to be powered from camera batteries.
For DL, S4 and D4 panels, you can choose between V-Lock, Gold-Mount systems and six types of 7.4V batteries from leading camera manufacturers:
Canon BP (camera), JVC BN-VF8, Panasonic CGA-D, CGR-D, Panasonic VW-VBG6 , Sony NP-F, Sony BP-U.
For D8 and S8 panels, only V-Lock or Gold-Mount plates should be used.
The battery plate is mounted to the panel by the user, in place of the power supply. The manual and the key are attached to the battery plate.