| Video Formats |
|
| |
525i 29.97 |
| |
625i 25 |
| |
720P 50, 59.94, 60 |
| |
1080i 25, 29.97, 30 |
| |
1080PsF 23.98, 24, 25, 29.97, 30 |
| |
1080p 23.98, 24, 25, 29.97, 30 |
| Video Input Digital |
|
| |
SD/HD SDI, SMPTE-259/292/296, 8- or 10-bits |
| |
Single link 4:2:2 (1 x BNC) |
| |
HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p-50/60 |
| Video Input Analog |
|
| |
Composite/S-Video (Y/C) (1 x BNC/2x BNC+Adaptor) |
| |
NTSC, NTSCJ, PAL |
| |
Component (3 x BNC) |
| |
HD: YPbPr, RGB |
| |
SD: YPbPr, RGB (component mode) |
| |
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB |
| |
12-bit A/D, 8x oversampling |
| |
+/- .2 dB to 5.0 MHz Y Frequency Response |
| |
+/- .2 dB to 1 MHz C Frequency Response |
| |
.5% 2T pulse response |
| |
<1% Diff Phase |
| |
<1% Diff Gain |
| |
<1 ns Y/C delay inequity |
| Video Output Digital |
|
| |
SD SDI, SMPTE-259M, 10-bit |
| |
HD SDI, SMPTE-292/296, 10-bit |
| |
HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p-50/60 |
| Video Output Analog |
|
| |
Composite/S-Video (Y/C) (1 x BNC/2x BNC+Adaptor) |
| |
NTSC, NTSCJ, PAL |
| |
Component (3 x BNC) |
| |
HD: YPbPr, RGB |
| |
SD: YPbPr, RGB (component mode) |
| |
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB |
| |
12-bit D/A, 8x oversampling |
| |
+/- .2 dB to 5.0 MHz Y Frequency Response |
| |
+/- .2 dB to 1 MHz C Frequency Response |
| |
.5% 2T pulse response |
| |
<1% Diff Phase |
| |
<1% Diff Gain |
| |
<1 ns Y/C delay inequity |
| Audio Input Digital |
|
| |
8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous |
| |
2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or optional KL-Box) |
| Audio Input Analog |
|
| |
2-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (via 2 x XLR on breakout cable or optional KL-Box) |
| |
+24dbu Full Scale Digital |
| |
+/- 0.2db 20 to 20kHz Frequency Response |
| Audio Output Digital |
|
| |
8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous |
| |
2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or optional KL-Box) |
| Audio Output Analog |
|
| |
2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 2 x XLR on breakout cable or optional KL-Box) |
| |
+24dbu Full Scale Digital (0dbFS) |
| |
+/- 0.2db 20 to 20kHz Frequency Response |
| |
2-channel unbalanced output (via 2 x RCA jacks on optional KL-Box) |
| Down-conversion |
|
| |
Hardware 10-bit |
| |
Anamorphic: full-screen |
| |
Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved |
| |
Crop: Crop: image is cropped to fit new screen size |
| Reference Input |
|
| |
Analog Color Black (1V) or Composite Sync (2 or 4V) |
| |
looping |
| |
75 ohm on optional KL-Box, terminated on supplied breakout cable |
| Machine Control |
|
| |
RS-422, Sony 9-pin protocol (via breakout cable or optional KL-BOX) |
