VPLHW65ESW
Advanced SXRD panel technology is teamed with Reality Creation - Sony's Super Resolution processing technology that refines subtle details, colours and textures. You'll see the difference with crisp, sharp Full HD pictures that take you closer than ever to the original 1080p source.
With an impressive 1,800 lumens brightness and high 120,000:1 dynamic contrast range, Full HD images are clear and with bright highlights and rich, deep blacks – even in well-lit rooms.
The projector is also available in a stunning new white finish that looks beautiful in any contemporary or traditional décor.
Coupled with the panel's super-fast response rate, Motionflow technology means you’ll see every detail with minimal blur - no matter how fast the action.
6000 hour rated lamp operating life (in Low mode) means simpler maintenance, with fewer lamp swaps and reduced running costs.
The manual zoom lens with a 1.6x zoom ratio and wide lens shift range gives greater installation flexibility in any room size, even with high ceilings.
With the fan exhaust positioned at the front of the projector, you don’t need to worry about wall clearance and room for air inhale/exhaust when installing. This helps maximise throw distance, for the biggest possible projected images.
The VPL-HW65ES is compatible with a wide range of home automation systems via an RJ45(IP), RS-232C, TRIGGER and IR IN interfaces.
The projector's built-in RF transmitter synchronises with any RF 3D glasses for wider coverage and greater stability, so there’s no need for an external transmitter.
You're always up to date with the latest features and firmware updates via the projector's USB port.
General | |
Display system | High Frame Rate SXRD panel |
Light Output | 1700 lm |
Contrast ratio | 120,000:1 (Dynamic Contrast) |
Display elements | 0.61” x 3 |
Effective display size | |
Display elements | Full HD(1920x1080)x3 6,220,800 pixels |
Effective pixels | |
Projection lens | Manual (Approx. 1.6 x) / Manual |
Zoom / Focus | |
Projection lens | Manual, V:+/-71% / H:+/-25% |
Lens shift | |
Light source | Ultra High-pressure lamp 200W type |
Screen size | 40” to 300'‘ |
Reality Creation | YES ( FullHD Reality Creation ) |
Compatible with 4K mastered Blu-ray | No |
4K 60P(YUV420/8bit) | No |
3D capability | YES |
3D emitter | Built-in IR emitter ( Compatible with RF external emitter ) |
3D glasses | TDG-PJ1 ( IR type : Bundled ) / TDG-BT500A (RF type : Optional) |
Auto Caliblation | No |
Manual Caliblation | HSV Colour Correction |
Picture Position Memory | No |
Wireless HDMI compatibility | IFU-WH1 ( Optional ) |
Advanced Iris | Ver 3 |
Picture modes | 9 modes |
Gamma modes | 11 modes |
Panel Alignment | Yes (Shift / Zone) |
Input/Output | Digital RGB/Y Pb/Cb Pr/Cr |
HDMI (2 inputs) | |
Input/Output | Component: phono type |
Y Pb/Cb Pr/Cr | |
Input/Output | Mini D-sub 15-pin (RGB) |
INPUT A | |
Input/Output | RS-232C, D-sub 9-pin (female) |
Remote | |
Input/Output | Mini Jack |
IR IN | |
Input/Output | Built-in IR Transmitter or via RJ-45 ( External IR transmitter TMR-PJ2 or RF transmitter ) |
3D Sync | |
Acoustic noise* | 21dB |
Power requirement | AC 100 V to 240 V, 3.0 A to 1.3 A,50/60 Hz |
Power consumption | Max. 300 W |
Body Color | White |
Standard outside dimensions | W 407.4 x H 179.2 x D 463.9 mm |
Weight | Approx. 9.6 kg |
Supplied Accessories | Remote Control RM-PJ23 |
Size AA (R6) manganese batteries (2) | |
AC Power Cord for projector (1) | |
3D glasses (TDG-PJ1 x 2) | |
Pouch for the 3D glasses (2) | |
Operating Instructions (1) |