Four flaps barndoors for the S4 illuminator.

After installation of permanent brackets to the light it is possible quick assembly and disassembly of barndoors by pulling the movable upper mounting pins.

Sold as a kit for self-assembly on the light.

Bag for secure transportation of Akurat LED panel D4.

The bag is included in the reporter kits, but can be ordered separately.

Four flaps barndoors for DL MK2 illuminator.
 
The barndoors slides under the accessory mounting brackets on the front of the panel.
 
Strong Velcro strips protect the barndoors against slipping out.

The bag allows secure transportation of Akurat DL, S4 and D4 MK2 LED panels, as well as previous models.

High-quality Mean Well power supply with a very high declared Mean Time Between Failure (MTBF) of 350,000 hours.
The power supply is equipped with a connector suitable for Akurat MK2 DL, S4 and D4 panels.

To connect to the AC network, you need a cable with an IEC C13 plug (not included with the power supply).

The bag allows secure transportation of Akurat D8 or S8 MK2 LED panels, as well as previous models.

Akurat Lighting W-DMX devices enable reliable, wireless DMX signal transmission to lighting fixtures via radio.

The Akurat W-DMX transmitting part works with any DMX lighting controller, compliant with the DMX512-A standard. Akurat W-DMX receiving modules have been designed to work with Akurat MK2 LED luminaires, but the system allows you to connect the signal to any DMX-compatible luminaire.

 
The Akurat W-DMX system uses the W-DMX technology of the Swedish company Wireless Solution. Therefore, it is compatible with all of W-DMX G5 and later devices manufactured by Wireless Solution – one of the undisputed leader on the wireless DMX signal transmission market.
 
The basic components of the Akurat W-DMX system are:

•  W-DMX Transceiver W-DMX signal transmitter which is connected to the DMX controller output (it can also work as a signal receiver)
•  W-DMX Receiver W-DMX signal receiver designed to be connected to dedicated USB input at the Akurat MK2 and SECTOR luminaires

Four flaps barndoors for D4 MK2 illuminator.
 
The barndoors slides under the accessory mounting brackets on the front of the panel.
 
Strong Velcro strips protect the barndoors against slipping out.

Honeycomb Grid 40° for D4 MK2 Illuminator
 

The grid is used to limit the light distribution angle to about 40 degrees, without losing the illumination intensity and the diffusive nature of the light in the direction opposite to the lamp.
An aluminum honeycomb structure covered with black composite has been enclosed in an aluminum frame.

High quality softbox dedicated for Akurat D4mk2 and S4mk2 panels, manufactured by DoPchoice, leading manufacturer of lighting modifiers from Munich.

Snapbag has a friendly for user design, making possible very quick setting on panel and easy transportation in small flat bag, without necessity of dismantle the softbox.

Snapbags are delivered with transportation bag and medium density front diffuser “HALF”.

Other density diffusers are available: 1/4 (thinner), 1/1 (denser) and the “MAGIC” diffuser.

Snapgrids 40 to mounting in front of diffuser of Snapbags are also available as additional accessories. Grid limits the light distribution to the sides without any changes in straight direction.

The Snapbag fits also to older models D4A and S4 panels.

Four flaps barndoors for D8 MK2 illuminator.
 
The barndoors slides under the accessory mounting brackets on the front of the panel.
 
Strong Velcro strips protect the barndoors against slipping out.

Honeycomb Grid 40° for D8 MK2 Illuminator
 

The grid is used to limit the light distribution angle to about 40 degrees, without losing the illumination intensity and the diffusive nature of the light in the direction opposite to the lamp.
An aluminum honeycomb structure covered with black composite has been enclosed in an aluminum frame.

High-quality Mean Well power supply with a very high declared Mean Time Between Failure (MTBF) of 350,000 hours.
The power supply is equipped with a connector suitable for Akurat MK2 D8 and S8 panels.

To connect to the AC network, you need a cable with an IEC C13 plug (not included with the power supply).

Set of replacement lenses for the Akurat S4 mk2 LED illuminator.
You can choose from:

• Beam angle of 30 degrees.
• Beam angle of 60 degrees.
• Beam angle of 90 degrees.
• Kit of 30 degrees and 90 degrees (S4MK2 only)

The kit includes 4 units of lenses fitted to magnetic holders in luminaire. The set is packed in a plastic carrying case enables safe transport.

Sets of replacement lenses 60 and 90 degrees and double set 30+90 degrees to change a photometric parameters of S4 mk2 illuminator in a full range also available.

High quality softbox dedicated for Akurat D8mk2 and S8mk2 panels, manufactured by DoPchoice, leading manufacturer of lighting modifiers from Munich.

Snapbag has a friendly for user design, making possible very quick setting on panel and easy transportation in small flat bag, without necessity of dismantle the softbox.

Snapbags are delivered with transportation bag and medium density front diffuser “HALF”.

Other density diffusers are available: 1/4 (thinner), 1/1 (denser) and the “MAGIC” diffuser.

Snapgrids 40 to mounting in front of diffuser of Snapbags are also available as additional accessories. Grid limits the light distribution to the sides without any changes in straight direction.

The Snapbags fits also to older models D8A and S8 panels.

SNAPGRID and Carry Bag for use with DOPCHOICE SNAPBAG.

For Akurat D8 or S8

SNAPGRID and Carry Bag for use with DOPCHOICE SNAPBAG.

For Akurat D4 or S4

Battery plates for powering MK2 panels from a battery .
 

A wide range of battery plates is available, allowing the fixture to be powered from camera batteries.
 

For DL, S4 and D4 panels, you can choose between V-Lock, Gold-Mount systems and six types of 7.4V batteries from leading camera manufacturers:

Canon BP (camera), JVC BN-VF8, Panasonic CGA-D, CGR-D, Panasonic VW-VBG6 , Sony NP-F, Sony BP-U.
 

For D8 and S8 panels, only V-Lock or Gold-Mount plates should be used.
 

The battery plate is mounted to the panel by the user, in place of the power supply. The manual and the key are attached to the battery plate.