Atomos coiled micro HDMI to full HDMI cable (30cm).

Atomos coiled micro HDMI to full HDMI cable (30cm).

Atomos straight micro HDMI to micro HDMI cable (50cm).

ATOMOS Full HDMI to Full HDMI Cable (50cm) ATOMCAB011

Designed for the Blackmagic Pocket Cinema Camera 4K, the new Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries (NPF570 type) so you can shoot for over 2 hours on a single charge! It’s perfect for anyone that needs to shoot for extended periods of time. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots. L‑Series batteries are standard batteries used for a variety of professional lighting equipment, so they’re readily available. You can even charge the batteries in the grip via the camera’s 12V DC connection in between takes!

CLEARANCE - only 1 piece available

80 CM SDI CABLE HOOKED BNC - YELLOW

Designed for the Blackmagic Pocket Cinema Camera 4K, the new Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries (NPF570 type) so you can shoot for over 2 hours on a single charge! It’s perfect for anyone that needs to shoot for extended periods of time. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots. L‑Series batteries are standard batteries used for a variety of professional lighting equipment, so they’re readily available. You can even charge the batteries in the grip via the camera’s 12V DC connection in between takes!

DC cable pack for use with the new Blackmagic Design Pocket Cinema Camera 4K.

E-Image EI-A47 with 11 inch arms,it is designed perfectly for mounting monitors, LED lights, a flash light or any device that accepts a 1/4 inch screw male or 3/8 inch screw female or 15mm rod end. 

E-Image EI-A46 with 6 inch arms,it is designed perfectly for mounting monitors, LED lights, a flash light or any device that accepts a 1/4 inch screw male or 3/8 inch screw female or 15mm rod end. 

The Gravity G1 is a handheld gimbal system for: compact DSLRS, DSLRS, and smartphones. It has three user modes and is compatible with the TILTA Assistant App, for greater calibration of features. Two rosettes on the handle allow for the mounting of various accessories to customize your rig with your needs.

Batterykit (charger + batteries) included.

The CINE 3514 Lens is a compact lens designed for compact system cameras for both photography and cinematography. Excellent for portrait and creative photography.

With a wide aperture it shows a sharp “hot spot” in the centre and a beautiful, soft bokeh in the boundary area aided by 12 curved aperture blades and optical design. With different combinations of f-stop and focus, The CINE 3514 provides a lovely feel and look to images, perfect for both stills photography and cine use.

MFT MOUNT

The Boompole Pro is a precision-balanced professional boompole for location recording. Made from carbon fibre, the Boompole Pro is strong and ultra lightweight. It weighs just 535 grams and has a reach of 3 metres. It features an ergonomic grip and intuitive lock/release system that makes it easy to extend and retract.

Atomos Spyder is the world's first portable and most affordable colour calibration unit. Combined with an Atomos field recorder* Spyder enables users to colour calibrate their monitor anywhere, anytime in three easy steps.

The LIBEC ALLEX S8 KIT is a complete slider solution. In this kit: head + tripod with midspreader + slider.

The travelMate 360 is created to carry on board most airplanes and fits the overhead compartment. If room is limited, the rotating wheels with a 360°radius can be detached to minimize the outer measurements of the bag. Strong but lightweight padding allows this bag to carry cameras with a maximum length of 45 cm/ 17.7 inches.

On the front, a separate compartment is added to store your laptop or tablet. Various pockets and slits on both the inside and outside of the bag help you store and organize several smaller items like documents, memory cards, cables and tools.

The soft-padded interior includes removable dividers with extra wide hook and loop fasteners for better adhesion to the fabric. This makes it easy to arrange the main compartment into sections to fit to your personal requirements.

Some of the smart gimmicks added to these bags are the straps on the side of the main compartment flap to prevent it from falling open, and a complimentary LED light with motion sensor that lights up as soon as you open up the bag!

The right solution for phone vlogging and live streaming.  It supports both handheld shooting and tripod shooting.  A mini LED light and professional microphone included.

SmallRig Wooden NATO Side Handle 2187 is designed to provide a comfortable handheld shooting for cameramen. It is locked via NATO clamp to make your setup quick release and fits any cage featuring NATO rail on the side. A built-in hex on the top to adjust the handle up and down based on your needs. If you want to use it on the other side of the cage, use the hex to take off the connection metal part of the handle and change the direction. The quick release handle features a cold shoe and 1/4”-20 & 3/8”-16 threaded holes on top which allow you to mount other accessories.

Top handle, NATO compatible

This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods.

The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.

Baseplate with Dual 15mm Rod Clamp

This high quality camBag HD Small - Black ensures solid protection for a wide range of professional camcorders up to 50 cm/ 19.7 inch. Special reinforcement of top, bottom and sides, safeguards your high value camera and accessories, in all weather conditions.