The PTC-150T HD/SD Video Camera is a PTZ camera that can be mounted on a wall, ceiling, floor, or a tabletop. 

The camera is equipped with HDBaseT Technology (HBT-11 Receiver Included) for remote control purpose, video image conveyance, power transmission and Ethernet connection. 

The camera captures HD video at 1920 x 1080 resolution and features wide dynamic range with backlight compensation. The camera features a motorized 30x optical zoom capability and its image mirror and image rotation functions allow you to electronically adjust the image and deliver a correctly orientated image. In addition to the basic camera functions, the PTC-150T also has a receiver box that allows the user to control the camera at a remote location with just one Ethernet cable.

50 programmable presets including pan, tilt, and zoom positions, allow the camera to quickly move between predetermined camera positions using the remote, or an available PTZ controller.

For multi camera shoots, the built in tally light can identify active camera. The camera features a built in IR cut filter in the image path for low light shooting and 
then returns for daytime shooting. Also, PTC-150T supports real time position report on a per frame basis; this is helpful in a virtual studio application. 

The camera supports Sony VISCA protocol for PTZ control using RS-422 interface over the unit's RJ-45 port.

The SE-500HD is a small, cost-effective, HD/SD digital video switcher with easy-to-use professional features. It offers 4x HDMI inputs and 2x HDMI outputs and supports video formats up to Full HD 1080P.

The SE-500HD also features audio mixer with microphone and unbalanced RCA audio inputs / outputs.

Other features include Lumakey, PIP, WIPE Generator and Tally.

The RMC-185 is a cost effective physical controller designed specifically for control of the KMU series 4K Multi-Camera Processor.

The RMC-185 interfaces with the KMU-100 via an RS-422 interface. This dedicated controller allows operators to make smooth zoom and pan/tilt motions by using the joystick.

4 presets are available that hold scale, position, motion path and speed of all 4 individual 3Gb/s outputs, per channel. Buttons allow start/stop/reset of motion in a predefined speed of every individual output.

Datavideo’s all new KMU-100 is a unique 4K multi-camera production solution that delivers multiple virtual full HD (up to 1080p) scaled camera angles with minimal installation cost and simple operation. The basic concept is straightforward: The output of a single 4K/UHD camera is connected to KMU-100, which then displays up to four 16x9 user-defined cropped windows that are sent out as four separate HD signals through HD-SDI. These user defined windows can be scaled to zoom in on a particular subject that you would like to highlight on the 4K signal. As an option, the Datavideo RMC-185 controller can be added to easily pan, tilt, and zoom to create the user defined windows on the 4K signal. You can set up these shots in advance and save them as presets, or you can do it in real-time.

Adding instant replay to any sports production has never been this easy. The cost-effective workflow of Datavideo’s HDR-10 highlight replay unit combined with the all new RMC-400 controller makes it possible for any school to add an instant replay feature for higher quality productions. 

The RMC-400 can control up to four HDR-10 highlight replay units, allowing you to have instant replay with slow motion and up to four different camera angles. Easily press one button to mark your in point to create a highlight clip, then press one button to replay. You can use the T-bar to control the speed for a true professional hardware operation. Since you can connect multiple HDR-10s to the RMC-400, you can start off with 1-2 cameras and expand to 4 cameras for bigger productions.

Bluetooth remote control for use with the Datavideo teleprompters. Compatible with iPad/Android tablets.

Rackmount System for up to 8 x DAC Converters

1U rackmount for 1 or 2 half-rack width Datavideo Products : suitable for AD-100, DAC-90, VS-150

Datavideo 1U Redundant Power Distribution System for Mobile Video Studio

400 watt rated power supply

In the production studio, good communication between the director, cameraman, lighting and control room is essential to produce a polished end result.

Hand carrying case designed for the TP-650 teleprompter. The HC-600 is an essential means of protecting and transporting the TP-600, complete with mountings. The case's design allows the end user to take the TP-650 pre-cut foam out of the original box packaging and fit directly it into the HC-600 carry case.

The DAC-8P is small and intelligent converter for converting HD & SD-SDI to HDMI. Datavideo's DAC-8P converts from both HD-SDI and SD-SDI to HDMI enabling users to utilize traditional and affordable LCD and Plasma televisions as well as video projectors for broadcast video monitoring.

Datavideo DAC70 up/down/cross converter is designed to convert video signals from VGA, HDMI, SDI with audio input to 3G HD/SD SDI outputs. Perfect for connecting a VGA/HDMI from computer to SDI devices over long distance SDI cable.

The Datavideo DAC-60 is a HD/SD-SDI to VGA converter. It's designed for use with equipment such as projectors, plasma TV, and LCD screens.

Datavideo 50m Intercom Extn Cable (between ITC-100 & ITC100SL)

Datavideo 20m Intercom Extn Cable (between ITC-100 & ITC100SL)

With built-in super resolution engine, users can now up-convert from SD 480 resolution all the way to 4K resolution with excellent image quality and sharpness.

The NVS-40 is a multi-channel video streaming and recording device. It features independent SDI and HDMI inputs, allowing up-to four sources to be recorded to hard drive and streamed independently. It also features external audio input as XLR balanced audio or RCA unbalanced audio.

Additional Belt Pack for ITC-100

2-Channel Audio De-Embedder

Extend the capabilities of SDI cable. 1 x VP-633 with 3x VP-634 SDI repeaters can each extend the range by a further 200m (high quality SDI cable)

The DAC-91 is an embedded audio box with useful functions that allow users to embed 2 channels of analogue audio into SDI video signal.

It features 3G/HD/SD-SDI to support up to 1080p/60 video format, automatically detecting and switching between the different formats and provides mini XLR and RCA audio connectors for inputting analogue audio.

The Audio box also has audio level adjustment by using the built-in DIP switches.