Left Banner

Home

Subcategories

Active filters

  • Brand: AKURAT LIGHTING
  • Brand: TILTA
  • Brand: VARIZOOM

There are 66 products.

AKURAT LIGHTING Akurat D4 mark 2 – efficient 65W diffusion LED panel

D4 MK2 – efficient LED panel for reporters and for the studio.

Perfectly diffused light gives beautiful, soft shadows, devoid of a matrix structure.

D4 MK2 is another incarnation of the smallest panel of Akurat D-SOFT series, a panel made of aluminum with dimensions of 30×26 cm. The fixture is now more powerful and has a much greater light output . The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.

Many accessories are available including barndoors, grid, softbox, battery plates, communication modules.

 
Basic parameters:

  • Maximum luminous flux approx. 6000 lumens
  • Maximum illuminance up to 1800 lux @ 1m
  • CRI Ra=97+ TLCI 99-100
  • Maximum electric power – 65W
  • Studio version
€646.87 Regular price €718.74
AKURAT LIGHTING Akurat S4 MK2 efficient lenticular 60W LED panel

S4 MK2 – efficient lenticular LED panel with replaceable optics for reporters

 

The aluminum illuminator with dimensions of 30×26 cm is a new incarnation of the smallest panel of the Akurat S series. The panel is more than twice as powerful as its predecessor S4bi and has an essentially greater beam of light. The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.

The optical system consists of 4 interchangeable TIR lens units, placed on magnetic holders, which shape the two basic photometric parameters of the luminaire – the angle of the light beam and the maximum illuminance achieved.

 
Basic parameters:

  • Maximum luminous flux approx. 6000 lumenów
  • Maximum illuminance up to 12’800 lux @ 1m
  • Light beam angle 30, 60, 90 or 120 degrees
  • CRI Ra=97+, TLCI 99-100
€675.18
TILTA TILTA UHT04 - Quick release handgrips (CLEARANCE)

This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods.

The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.

€419.30 Regular price €599.00
TILTA TILTA LST03 - Adjustable lens support for 15mm bars (CLEARANCE)

This lens support gives you stability for your lens while being compatible with 15mm LWS rods.

The center adjustable knob allows you to raise and lower the support to tightly secure your lens.

It also features an open design to how it clamps onto the rods so that you can easily attach and detach it without the need to remove other accessories.

€51.30 Regular price €64.13
AKURAT LIGHTING AKURAT A1N - LED CAMERALIGHT 3000 - 5700 K

A small LED panel for the accessory shoe, emitting top-quality full-spectrum light. 

The light is equipped with two sets of Natural Light diodes: warm 3000 K and cold 5700 K.

 

A1 features innovative white LEDs called Natural White, based on a multi chip pump and ensuring an unsurpassed spectrum of light nearest as possible to the spectrum of natural sources of light. CRI Ra of the emitted light is outperforms 97 , and R9, which is usually the lowest CRI factor of LED lights, exceeds 90.

The device allows to adjust brightness as well as colour temperature over the entire 3000–5700 K range.

The light features state-of-the-art integrated circuits whose energy efficiency exceeds 95%. This ensures low energy consumption during battery operation.

€338.80
AKURAT LIGHTING Akurat DoPchoice Snapbag (Softbox) for D8MK2 and S8MK2

High quality softbox dedicated for Akurat D8mk2 and S8mk2 panels, manufactured by DoPchoice, leading manufacturer of lighting modifiers from Munich.

Snapbag has a friendly for user design, making possible very quick setting on panel and easy transportation in small flat bag, without necessity of dismantle the softbox.

Snapbags are delivered with transportation bag and medium density front diffuser “HALF”.

Other density diffusers are available: 1/4 (thinner), 1/1 (denser) and the “MAGIC” diffuser.

Snapgrids 40 to mounting in front of diffuser of Snapbags are also available as additional accessories. Grid limits the light distribution to the sides without any changes in straight direction.

The Snapbags fits also to older models D8A and S8 panels.

€338.80
AKURAT LIGHTING Akurat Set of lenses for S4 and S8 MK2 LED panels

Set of replacement lenses for the Akurat S4 mk2 LED illuminator.
You can choose from:

  • Beam angle of 30 degrees.
  • Beam angle of 60 degrees.
  • Beam angle of 90 degrees.
  • Kit of 30 degrees and 90 degrees (S4MK2 only)


The kit includes 4 units of lenses fitted to magnetic holders in luminaire. The set is packed in a plastic carrying case enables safe transport.

Sets of replacement lenses 60 and 90 degrees and double set 30+90 degrees to change a photometric parameters of S4 mk2 illuminator in a full range also available.

€125.84
AKURAT LIGHTING Akurat S8 MK2 efficient lenticular 120W LED panel

S2 – efficient lenticular LED panel with replaceable optics for reporters

The aluminum illuminator with dimensions of 30×26 cm is a new incarnation of the smallest panel of the Akurat S series. The panel is more than twice as powerful as its predecessor S4bi and has an essentially greater beam of light. The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.

The optical system consists of 4 interchangeable TIR lens units, placed on magnetic holders, which shape the two basic photometric parameters of the luminaire – the angle of the light beam and the maximum illuminance achieved.

 
Basic parameters:

  • Maximum luminous flux approx. 3000 lumen
  • Maximum illuminance up to 6400 lux @ 1m
  • Light beam angle 30, 60, 90 or 120 degrees
  • CRI Ra=97+, TLCI 99-100
€1,046.65