Video Formats
• (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
• (HD) 1920 x 1080i 25, 29.97, 30
• (HD) 1280 x 720p 50, 59.94, 60
• (SD) 625i 25
• (SD) 525i 29.97
Input
|
Possible Output Formats
|
525i59.94
|
525i59.94
|
720p59.94
|
1080i59.94
|
720p59.94
|
525i59.94
|
720p59.94
|
1080i59.94
|
1080i59.94
|
525i59.94
|
720p59.94
|
1080i59.94
|
|
1080pSF23.98
|
1080pSF23.98
|
1080i59.94
|
525i59.94
|
|
625i50
|
625i50
|
1080i50
|
720p50
|
720p50
|
625i50
|
1080i50
|
720p50
|
1080i50
|
625i50
|
1080i50
|
720p50
|
|
1080pSF24
|
1080pSF24
|
1080i60
|
|
1080i60
|
1080i60
|
720p60
|
|
720p60
|
720p60
|
1080i60
|
|
Notes:
In the case of 1080PsF 23.98 input - and when 1080i 59.94 (or 525i) is selected as an output format, the FS2 automatically does 3:2 pulldown to get the correct frame rate. Similarly, in the case of 1080pSF/24 input, FS2 automatically does 3:2 pulldown to get the correct frame rate.
When passing 24 or 60 frame rate video, output is high definition.
Video Input Digital
• Dual 3G-SDI, SMPTE-259/292/424, 8 or 10-bits
• Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector module
• Single Channel LC connector module
• Single Channel SC connector module
• Single Link 4:2:2 (1 x BNC each)
• HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/6060
Video Input Analog
• HD component YPbPr, SMPTE-274 (3 x BNC)
• 12-bit A/D, 2 x oversampling
• SD Component (3 x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit A/D, 4 x oversampling
• +/- .25 dB to 5.5 MHz Y frequency response
• +/- .25 dB to 2.5 MHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite
• 12-bit A/D, 4 x oversampling
Video Output Digital
• Dual SD/HD/3G SDI, SMPTE-259/292/424, 8 or 10-bits
• Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector modules
• Single Channel LC connector module
• Single Channel SC connector module
• Single Link 4:2:2 (1 x BNC each)
• HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60
Video Output Analog
• HD component YPbPr, SMPTE-274 (3 x BNC)
• 12-bit D/A, 2 x oversampling
• SD Component (3 x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit D/A, 4 x oversampling
• +/- .25 dB to 5.5 mHz Y frequency response
• +/- .25 dB to 2.5 mHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite
• 12-bit D/A, 4 x oversampling
Audio Input Digital
• 16-Channel, 24-bit SMPTE-272/299 SDI embedded audio, 48 kHz sample rate, synchronous
• 16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (8 x XLR via 25-pin breakout cable)
Audio Input Analog
• 8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8 x XLR via 25-pin breakout cable)
• +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
• +/- 0.2db 20 to 20 kHz frequency response
Audio Output Digital
• 16-Channel, 24-bit SMPTE-272/299 SDI embedded audio, 48 kHz sample rate, synchronous
• 16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (8 x XLR via 25-pin breakout cable)
Audio Output Analog
• 8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8 x XLR via 25-pin breakout cable)
• +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
• +/- 0.2db 20 to 20 kHz frequency response
Up-Conversion
• Hardware: 10-bit
• Anamorphic: fullscreen
• Pillarbox 4:3: results in a 4:3 image in center of screen with black sidebars
• Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
• Zoom Letterbox: results in image zoomed to fill full screen
• Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-Conversion
• Hardware: 10-bit
• Anamorphic: fullscreen
• Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
• Crop: image is cropped to fit new screen size
Cross-Conversion
• Hardware 10-bit
• 1080i to 720p
• 720p to 1080i
• 720p to 1080PsF
SD to SD Aspect Ratio Conversion
• Letterbox: This transforms SD anamorphic material to a letterboxed image
• H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and • an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an anamorphic image
Timecode
• SDI RP188 via SDI BNC
• Reference input
• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping, nonterminating
Network Interface
• 10/100 Ethernet (RJ-45)
• Embedded web server for remote control
• VTECS™ protocol for Remote Control Panel
User Interface
• Alphanumeric display, with dedicated buttons/knobs
Machine Control
• GPI in/out, 15-pin D-connector
• Pinout is as follows:
1
|
GND
|
9
|
GPI OUT 2
|
2
|
GPI IN 1
|
10
|
GPI I/O GND 3
|
3
|
GPI IN 2
|
11
|
GPI I/O GND 4
|
4
|
GPI IN 3
|
12
|
GPI OUT 3
|
5
|
GPI I/O GND 1
|
13
|
GPI OUT 4
|
6
|
GPI I/O GND 2
|
14
|
NC
|
7
|
GPI IN 4
|
15
|
GND
|
8
|
GPI OUT 1
|
|
|
Size (w x d x h)
• 17.25" x 14.5" x 1.75" 1RU (438.1mm x 368.3mm x 44.4mm)
Weight
Power
• 100-240 VAC 50/60 Hz, (Dual, redundant power supplies), 55W typical; 80W max.
Environment
• Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
• Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
• Operating Relative Humidity: 10-90% noncondensing
• Operating Altitude: <3,000 meters (<10,000 feet)