The Flex 4K HDMI In to Full NDI Encoder from BirdDog is an ultracompact NDI interface for HDMI video sources. Connect your onboard monitor, camera, or other video source, and have it instantly be available on your NDI-enabled network. The BirdDog Flex In supports up to UHD 4K30 and 1080p60 resolution video.
Prices drop
Designed for the Blackmagic Pocket Cinema Camera 4K, the new Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries (NPF570 type) so you can shoot for over 2 hours on a single charge! It’s perfect for anyone that needs to shoot for extended periods of time. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots. L‑Series batteries are standard batteries used for a variety of professional lighting equipment, so they’re readily available. You can even charge the batteries in the grip via the camera’s 12V DC connection in between takes!
CLEARANCE - only 1 piece available
The all new ATEM Television Studio HD8 is a compact live production switcher with built in broadcast control panel. Get a fully featured broadcast quality live production studio with 8 standards converted 3G-SDI inputs, built in streaming, master recorder, multiview, USB webcam support, DVE, 4 ATEM Advanced Chroma Keyers, media players, talkback, 4 way Ethernet switch and optional internal cloud media storage.
PROMOTION! This price is only valid on current stock.
FlexTally is a tally lamp system designed for easy operability and is available at a price range that means even small studios or streaming sites can look to add it to their multi-camera set-ups. FlexTally can be used via either wireless or wired connections for added convenience and its built-in battery allows for portability and use in remote shooting locations.
The Datavideo NVD-25 is a wired IP video decoder with SDI, Composite analogue, audio outputs. The NVD-25 decodes all common protocols including RTP/RTSP, RTMP, UDP, TCP, HTTP, HLS and MPEG-TS and can output SD/HD video at resolutions up to 1080p60.
EX DEMO UNIT, in perfect condition
In original box. Slight scratch on the top of the cover (slightly visible)
Lightweight telescopic boompole made of carbon fibre. For ENG/EFP work. With standard 3/8" thread.
E-Image EI-A48 with 13 inch arms,it is designed perfectly for mounting monitors, LED lights, a flash light or any device that accepts a 1/4 inch screw male or 3/8 inch screw female or 15mm rod end.
ikan’s Slider provides maximum support to video professionals in the field and studio. The Slider’s ball-baring system ensures smooth action every time capturing high quality hard to get shots. Its light-weight aluminum construction and sleek hard case makes it ideal to transport and store. Ikan’s Slider comes with fully adjustable table-top supports for added stability and easily slides vertical and horizontal.
Condition: new, in original packaging
Convert one channel of SD/3G-SDI signal with embedded audio to NDI® stream.
The PTZOptics 20X-NDI is a 1080p camera with 20X optical zoom for capturing HD images at long distances. With support for NDI|HX, 3G-SDI, HDMI, and IP streaming (H.264, H.265, & MJPEG), this camera is ideal for broadcasting high definition video signals for broadcast, recording, or video conferencing applications.
The Boompole Pro is a precision-balanced professional boompole for location recording. Made from carbon fibre, the Boompole Pro is strong and ultra lightweight. It weighs just 535 grams and has a reach of 3 metres. It features an ergonomic grip and intuitive lock/release system that makes it easy to extend and retract.
The Micro Boompole Pro is a modular booming device that is optimised for use with the VideoMicro. It allows the three sections to combine to a maximum length of 2.2m.
Baseplate with Dual 15mm Rod Clamp
SmallRig Wooden NATO Side Handle 2187 is designed to provide a comfortable handheld shooting for cameramen. It is locked via NATO clamp to make your setup quick release and fits any cage featuring NATO rail on the side. A built-in hex on the top to adjust the handle up and down based on your needs. If you want to use it on the other side of the cage, use the hex to take off the connection metal part of the handle and change the direction. The quick release handle features a cold shoe and 1/4”-20 & 3/8”-16 threaded holes on top which allow you to mount other accessories.
Tilta’s FS-T01 V-lock battery plate. This attaches to the rear of the camera. If you don’t want or need the additional ProRes recording, RAW SDI output and other connections, but still prefer a larger battery for longer run times and better balance then this looks like a great option.
This lens support gives you stability for your lens while being compatible with 15mm LWS rods.
The center adjustable knob allows you to raise and lower the support to tightly secure your lens.
It also features an open design to how it clamps onto the rods so that you can easily attach and detach it without the need to remove other accessories.
Tilta Articulating Arm with 15mm LWS Rod Adapter
Tilta MB-T05 Light-Weight Matte Box is a combination of aluminium housing and PVC material. Perfect for shooters on the go. Portable, light-weight and easy to attach and detach from your 15mm rail system.
Tilta UH-T03 (UHT03) Universal Handgrip with 3 Joints (for 15mm Rails/Bars). Three joints design allows adjustments of all angles.
Steel rosettes bring excellent stability to the handgrip.
Snap-on rod bridge accommodates both 15mm and 19mm rod systems.
This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods.
The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.